Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Tempe Junction, AZ

Pre-Paint Washing for Aluminum Siding in Tempe Junction, AZ

Soft wash for aluminum siding. Washing siding and trim before painting or staining so new paint bonds to a clean surface. Typical cost $250-$600.

From the free quote to the final rinse, pre-paint washing for aluminum siding in Tempe Junction, AZ follows a simple process: inspect, protect, clean, rinse and check. With aluminum siding, the right approach is soft wash.

The right method for the job

Soft washCleaning method
Soft wash, typically under 500 PSIPressure

Cleaning solution: A gentle detergent solution; strong cleaners can dull the finish further.

Cleaning aluminum siding safely

Older aluminum siding often has a chalky, oxidized finish. Washing removes dirt and mildew but also removes loose chalk, which can make faded panels look patchy. If the finish is badly oxidized, washing is usually the prep step before repainting.

Avoid: High pressure, which dents thin panels and strips chalky paint unevenly.

How often: Every 1-2 years.

When to book pre-paint washing for aluminum siding

  • You're about to paint or stain the house
  • Chalky residue comes off on your hand
  • Mildew or dirt under the old paint

Why it gets dirty

  • Paint chalking as it ages
  • Mildew that will grow through new paint if not killed
  • Dirt that weakens adhesion

What you can do yourself

  • Ask your painter what prep they need
  • Allow siding to dry for the time the paint maker recommends before painting

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Painting over mildew, which bleeds through
  • Too much pressure that damages wood or drives water into the wall
  • Painting before the wood is dry

What happens on the day

  1. Coordinate with your painter
  2. Protect plants and fixtures
  3. Kill mildew and wash the surface
  4. Remove loose chalk and dirt
  5. Leave the house to dry before painting

Typical pre-paint washing for aluminum siding prices

$250-$600Typical range for a typical home exterior
2-4 hours plus dry timeTypical time on site
Before every exterior paint jobRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for aluminum siding

Serving Tempe Junction, AZ and nearby towns

In Arizona, siding and stucco get dull from dust and spotted from sprinkler overspray more than from mildew. Hard-water spots need a different treatment than dirt, so we identify the stain before choosing the cleaner.

Much of Arizona has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

Some cities in Arizona limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We provide pre-paint washing for aluminum siding across Tempe Junction (ZIP codes 85280, 85281 and 85287) and nearby towns including Tempe (2 mi), Guadalupe (3.2 mi), Mesa (7 mi) and Scottsdale (7 mi). Call (555) 010-0000 for a free quote in Tempe Junction.

Pre-Paint Washing for Aluminum Siding: frequently asked questions

How much does pre-paint washing for aluminum siding cost in Tempe Junction, AZ?

Pre-Paint Washing for Aluminum Siding typically costs $250-$600 for a typical home exterior, and usually takes 2-4 hours plus dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pre-paint washing for aluminum siding?

For aluminum siding: soft wash, typically under 500 PSI. What we avoid: high pressure, which dents thin panels and strips chalky paint unevenly. The cleaning solution does most of the work, followed by a gentle rinse.

Is pre-paint washing for aluminum siding safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pre-paint washing for aluminum siding?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Tempe Junction, AZ

Soft Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$800

House Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$700

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Sidewalk & Walkway Cleaning

Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime.

Typical $100-$250

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Patio Cleaning

Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material.

Typical $150-$400

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Pressure Washing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$600

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Paver Cleaning & Sealing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $600-$1,800

Ready for a cleaner home or business?

Get a free pressure washing quote in Tempe Junction, AZ. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote