The secret to patio cleaning for concrete is using the right method, not the most pressure. In Tempe Junction, AZ, we match the cleaner and pressure to the surface so it comes out clean without damage. On concrete, the method we use is pressure wash with a surface cleaner.
The right method for the job
Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.
Caring for concrete
Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.
Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.
How often: Every year, or every 6 months in shaded, damp spots.
When to book patio cleaning for concrete
- Green or black growth between pavers or on shaded concrete
- Grease spots near the grill
- Stains from planters, leaves and furniture
- Weeds in the joints
- White chalky haze on pavers or stone
What causes the dirt and stains
- Shade and damp soil around the patio
- Cooking grease and food spills
- Rust from metal furniture and planters
- Efflorescence (salts) rising out of masonry
What you can do yourself
- Move planters now and then so they don't leave rings
- Clean grill grease quickly with dish soap and hot water
- Pull weeds from joints before they spread
- Sweep often so leaves don't stain
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Blowing joint sand out of pavers
- Etching or pitting soft stone like travertine and sandstone
- Acid cleaners on limestone and travertine
- Stripping an existing sealer unevenly
How we handle patio cleaning for concrete
- Check the patio material and any sealer
- Move furniture and protect nearby plants
- Pre-treat growth, grease and stains
- Clean with the right pressure and tools
- Rinse, re-sand joints if needed, and walk the patio with you
Patio Cleaning for Concrete cost in Tempe Junction, AZ
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for concrete
- Pressure Washing for Concrete
- Driveway Cleaning for Concrete
- Sidewalk & Walkway Cleaning for Concrete
- Pool Deck Cleaning for Concrete
- Concrete Sealing for Concrete
- Rust Stain Removal for Concrete
- Oil Stain Removal for Concrete
- Graffiti Removal for Concrete
- Gum Removal for Concrete
- Efflorescence Removal for Concrete
- Exterior Mold & Mildew Removal for Concrete
- Commercial Pressure Washing for Concrete
- Parking Lot & Garage Cleaning for Concrete
- HOA & Apartment Pressure Washing for Concrete
Serving Tempe Junction, AZ and nearby towns
Concrete and pavers in Arizona collect dust, oil and tire marks, and irrigation leaves white mineral deposits along the edges. Strong sun also wears out sealers quickly, so pavers here often need resealing more often.
Some cities in Arizona limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
We provide patio cleaning for concrete across Tempe Junction (ZIP codes 85280, 85281 and 85287) and nearby towns including Tempe (2 mi), Guadalupe (3.2 mi), Mesa (7 mi) and Scottsdale (7 mi). Call (555) 010-0000 for a free quote in Tempe Junction.
Patio Cleaning for Concrete: frequently asked questions
How much does patio cleaning for concrete cost in Tempe Junction, AZ?
Patio Cleaning for Concrete typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for patio cleaning for concrete?
For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.
Is patio cleaning for concrete safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule patio cleaning for concrete?
Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.