Efflorescence Removal is one of the jobs we do most often in Tempe Junction, AZ. Typical jobs cost $200-$600, and you approve the price before we begin.
Method and pressure
Signs you need efflorescence removal
- White powder or crust on brick, block or pavers
- Haze that comes back after rain
- White lines along mortar joints
Why it gets dirty
- Water moving through masonry and carrying salts to the surface
- New pavers and concrete still curing
- Downspouts and sprinklers soaking the masonry
What you can do yourself
- Brush dry efflorescence off with a stiff brush before wetting it
- Fix water sources such as gutters and sprinklers
- Wait out new installations: efflorescence on new pavers often fades on its own
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Washing with plain water, which can dissolve salts and redeposit them
- Strong acids that burn masonry
- Sealing over efflorescence, which traps it
What happens on the day
- Find the moisture source
- Dry-brush loose salts
- Apply an efflorescence cleaner
- Rinse and neutralize
- Seal only once the surface is clean and dry
How much does efflorescence removal cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Serving Tempe Junction, AZ and nearby towns
Hard-water spotting is the signature stain in Arizona: white rings and haze on walls, windows, fences and pool tile where sprinklers or misters hit.
Much of Arizona has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
Crews serve all of Tempe Junction (ZIP codes 85280, 85281 and 85287), plus Tempe (2 mi), Guadalupe (3.2 mi), Mesa (7 mi) and Scottsdale (7 mi). Call (555) 010-0000 for a free quote in Tempe Junction.
Efflorescence Removal: frequently asked questions
How much does efflorescence removal cost in Tempe Junction, AZ?
Efflorescence Removal typically costs $200-$600 for a typical wall, patio or walkway, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for efflorescence removal?
Efflorescence Removal is done with masonry cleaner and low-pressure rinse. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.
Is efflorescence removal safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule efflorescence removal?
As needed; it can return until the moisture source is fixed. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.